FLOWGROUT 40

FLOWGROUT 40 is based on specially processed cements containing fillers and additives. FLOWGROUT 40 is supplied as ready to use grout requiring addition of precise quantity of water at site (6.65 Litre/35 Kg grout). FLOWGROUT 40 is suitable for gap widths between 10mm-50mm. For width less than 10mm FLOWGROUT EP resin grout can be used. For thickness in excess of 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50%-100% of the quantity of grout used. Water needs to be precisely measured for good early & final strength (is obtained due to very low water requirement). 35 Kg of FLOWGROUT 40 will require 6.65 Litre of water (W/P=0.19) for making flowing grout. Expansion: Controlled expansion occurs in the unset material to ensure that the grout, when cured will continue to occupy its original volume within the confines of the voids in which it was placed. For thicker section it is necessary to fill out grout with well graded silt free aggregate to minimize heat build up.